3M™ Scotchkote™ Electrical Coating FD

性能描述

产品类型
产品标准
产品认证
产品极数
安装方式

3M™ Scotchkote™ Electrical Coating FD

产品描述:

3M电气喷胶是一种柔和的蜡状物,包含有溶解在石油馏分酒精基的溶剂中的防腐剂。喷胶设计用来作金属表面长期的防腐保护。无腐蚀,可烘干,无氟氯化碳,无卤,使用方便,符合Mil-C-16173

产品规格

15fl.oz/can

应用范围

电气喷胶用来防止金属部件被腐蚀,在适当的条件下可保持很长时间(室外至少1年)。主要用在电气和机械设备上,包括起重机、传动装置、磨具和其他大型的金属表面。

警告:此产品易燃,不能使用在高能设备。

物理性能

颜色:黑色

闪点:-104度(推进剂) -10度(溶剂)

爆炸下限:1%(体积含量)

爆炸上限:10.6%(体积含量)

使用方法

清理电气设备前,请先关闭设备,将电气喷胶喷嘴顶端靠近表面。在离表面8-10英寸时均匀喷涂产品,在通电前确保喷涂部位已经干燥。

使用后喷雾烘干成一层蜡状薄膜。如果需要祛除喷胶,用石油馏分的溶剂即可。

储存

3M电气喷胶不需要堵上气罐的喷嘴或担心喷涂时会飞溅出来和滴下。将瓶罐垂直放置,在喷涂时将喷嘴推到最下面。在低于49度条件下保存,以保证最长的储存期

图片关键词3M™ Scotchkote™ Electrical Coating  技术资料(点击下载)

图片关键词3M™ Scotchkote™ Electrical Coating FD MSDS技术资料(点击下载)

图片关键词3M™ Scotchkote™ Electrical Coating FD 技术资料(点击下载)

图片关键词3M™ Scotchkote™ Electrical Coating FD MSDS技术资料(点击下载)

图片关键词Cableand Wire Management (点击下载)

图片关键词3M™ Aerosols and Coatings(点击下载)

 

3M™ Scotchkote™ Electrical Coating FD, in brush-top 15-oz. can
3M ID  80611604135    UPC#  00051128601518    Part Number  SCOTCHKOTE FD  

3M™ Scotchkote™ Electrical Coating FD is a fast-drying sealant and bonding compound designed to improve weather resistance of taped splices. For direct burial, direct water immersion or above-ground applications. Not restricted for sale in U.S.

Specifications

 Application Method‎ ‎ Brush
 Applications‎ ‎ Seal on vinyl tape applications which are subject to excessive amounts of oil.
 Brand‎ ‎ 3M
 Can Size‎ ‎ 15 Fluid Ounce (US)
 Container Volume‎ ‎ 65
 Coverage Area‎ ‎ Depends on the applicatiom
 Drinking Water Approvals‎ ‎ Not approved for potable water applications
 Material‎ ‎ Synthetic rubber & resin
 Product Form‎ ‎ Liquid
 Product Type‎ ‎ Can
 RoHS 2011/65/EU Compliant‎ ‎ Yes
 RoHS EU Comments‎ ‎ RoHS 2011/65/EU compliant without exemption 
*Important RoHS information
 Shelf Life‎ ‎ 2 Year
 Storage Temperature‎ ‎ 10 to 27 Degree Celsius, < 75 % RH
 Trademark‎ ‎ Scotch
 Volume (metric)‎ ‎ 426 ml

图片关键词

3M™ Scotchkote™ Electrical Coating FD, in brush-top 15-oz. can

3M ID  80611604135    UPC#  00051128601518    Part Number  SCOTCHKOTE FD

3M™ Scotchkote™ Electrical Coating FD is a fast-drying sealant and bonding compound designed to improve weather resistance of taped splices. For direct burial, direct water immersion or above-ground applications. Not restricted for sale in U.S.

Specifications

Applications Resist moisture and corrosion
Can Size 15 Fluid Ounce (US)
China RoHS - Below MCV Yes
EU RoHS Compliant Yes
Trademark Scotch

Features

  • Compatible with Scotch™ brand plastic electrical tapes

  • Fast Drying

  • Flexible when dry

  • Contains own applicator

  • No waste – provided can is resealed after use

Applications

  • Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil

  • Protect surfaces against moisture, corrosion and other contaminants

  • Improves the weather resistance and moisture resistance of the taped joint or joint

  • Suitable for direct burial, direct water immersion or above ground applications

  • Application Tip: After taping joints with Scotch™ vinyl plastic electrical tape, apply Scotchkote™ electrical coating evenly over joint, extending a short distance onto the cable insulation. Be sure the surface is clean, dry and free from oil or grease before electrical coating is applied

Specifications

Good Adhesion to:

Wood, Metal , Rubber and Plastic

Dielectric Strength

Dry: 450 volts/mil

Dielectric Strength

24 hrs. in water: 200 volts/mil

Solvent

Methyl ethyl ketone, toluene

Features and Benefits:
  • Compatible with Scotch brand plastic electrical tapes
  • Fast drying
  • Flexible when dry
  • Contains own applicator
  • No waste - provided can is resealed after use
  • Intended for use as an outer seal on plastic tape applications, which are subjected to excessive amounts of oil
  • Protect surfaces against moisture, corrosion and other contaminants
  • improves the weather resistance and moisture resistance of the taped joint or joint
  • Suitable For Direct Burial, Direct Water Immersion Or Above Ground Applications
  • 425g

Scotchkote™ Electrical Coating is a fast drying sealant and bonding agent recommended for joints wrapped with plastic electrical tape. Scotchkote provides vinyl tapes with an extra oil, moisture and corrosion-resistant layer of flexible coating for problem areas. The product is supplied in a 425g brush top can.

 

3M™ Scotchkote™ Electrical Coating

图片关键词

图片关键词

3M™ Scotchkote™ Electrical Coating FD

图片关键词

图片关键词

图片关键词图片关键词

图片关键词图片关键词

图片关键词

分享到:
点击次数:  更新时间:2016-08-24 18:35:14  【打印此页】  【关闭