电机引线连接3M 5317 Motor Lead Pigtail Splice, 5-8 kV, Non-Shielded
电机引线连接3M™ Motor Lead Pigtail Splice 5317, 5-8 kV, Non-Shielded, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1 per case
Each kit makes three splices. Lugs not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).
Medium Voltage Leads, 5–8 kV
3M™ Motor Lead Pigtail Splice Kits, Non-Shielded Pigtail, 5316-5319
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including pigtail
(stub) connections at 1000 volts or less, as well as 5/8 kV non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM
rubber. A mastic strip is used for the moisture seal.
These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in a
pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit contains the necessary materials (except lugs) needed to make
three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be