3M DP100 Plus ClearScotch-Weld Epoxy Adhesive , 200 mL, 12 per case, Applicator Needed
3M™ Scotch-Weld™ Epoxy Adhesive DP100 Plus is a flexible, two-part epoxy adhesive. 1:1 mix ratio, 3-5 minute work life and handling strength in approximately 20 minutes. 3M™ Scotch-Weld™ EPX™ 200 mL applicator and mix nozzles are required (not included).
- 5 minute worklife
- Fast setting
- General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace
- Bonding, joining, gluing, attaching, assembling, encapsulating, potting and sealing.
3M™ Scotch-Weld™ Epoxy Adhesive DP100 Plus is low viscosity that allows for easy dispensing. Flexible bonds to a variety of materials such as, metals, glass, ceramics, wood and many plastics.
|Applications||Hard Disk Drive Component Assembly|
|Container Volume||200 ml|
|Full Cure||24-48 Hours @ 72 F (22 C)|
|Hardness||83 Shore D|
|Industries||Transportation, Specialty Vehicle, Construction, Military & Government, General Industrial, MRO, Electronics, Consumer Goods|
|Mix Ratio Volume Base:Accelerator||1 : 01|
|Peel Strength at 72 Degrees F (22 Degrees C)||10 lb/in|
|Shear Strength at 72 Degrees F (22 Degrees C)||3500 Pound-Force Per Square Inch|
|Shelf Life in Months (from date of manufacture)||15|
|Storage Temperature||72 Degree Fahrenheit|
|Substrate 1||Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber|
|Substrate 2||Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber|
|Time to Handling Strength||20 Minute|
|Viscosity Range (cps) at Room Temperature||8,500|
|Worklife||5 minutes @ 72 F (22 C)|