3M DP125 Gray Scotch-Weld Epoxy Adhesive, 400 mL, 6 per case Duo-Pak

性能描述

产品类型
产品标准
产品认证
产品极数
安装方式

3M DP125 Gray Scotch-Weld Epoxy Adhesive, 400 mL, 6 per case Duo-Pak

图片关键词3M™ Scotch-Weld™ Epoxy Adhesive DP125 Translucent and Gray TDS (PDF, 28.3KB)

图片关键词3M™ Scotch-Weld™ Epoxy Adhesive DP-125, Gray (US) 

图片关键词3M™ Scotch-Weld™ Epoxy Adhesive DP-125, Translucent (US) 

 

3M™ Scotch-Weld™ Epoxy Adhesive DP125 is a low odor, two-part epoxy that creates strong structural and flexible bonds on metal, ceramics, wood and many plastics. It provides the reliability and strength you need to maintain productive, cost effective results. This general purpose epoxy can be used on a wide variety surfaces and meet an equal variety of needs.
  • Maintains a strong bond under expansion, contraction, and limited movement
  • Medium viscosity helps minimize running, dripping or migration
  • Flows smoothly for controlled dispensing where needed
  • Duo-Pak cartridge fits 3M™ Scotch-Weld™ EPX™ Plus II Applicator and Mixing Nozzles, sold separately
  • Effective adhesive system for bonding, joining, gluing, attaching, assembling, encapsulating, potting, and sealing applications 

Our formula emits lower odor than most 5 minute epoxies and provides high shear and peel strength. DP125 starts with medium viscosity for easy, controlled dispensing where you need it, and minimizes any runs, drips or migration. Its flexibility when cured makes it ideal for applications involving dissimilar surfaces, where coefficients of thermal expansion are a consideration. The mix ratio is 1:1 and provides a 25 minute work life to allow plenty of time for positioning and to adjust for fit prior to setting. The adhesive reaches handling strength in approximately 2.5 hours and is fully cured in 7 days (at 72 degrees F/22 degrees C). For best results, always use 3M™ Scotch-Weld™ EPX™ Plus II Applicator and Mixing Nozzles, sold separately. Both mixing nozzle and applicator are required for dispensing from the Duo-Pak cartridge.

Epoxy adhesives are part of the class of adhesives called "structural adhesives" which also includes polyurethane, acrylic, cyanoacrylate, and others. Epoxies begin as liquid reactive polymers that undergo a chemical chain reaction when mixed, and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited working time where the adhesive can be applied and the two surfaces positioned as need. This "work life" lasts anywhere from a few minutes to 48 hours or longer. This class of structural adhesives provides high shear and peel strengths, depending on the formula and better heat and chemical resistance than other common adhesives. Epoxies that are heat cured are more heat and chemical resistant than those that cure at room temperature. Epoxy adhesives are widely used in building and home construction, aircraft and automobile manufacture, bicycle, boat, golf clubs, ski, and snowboard assembly and a host of home use and other applications; virtually anywhere high-strength bonds are needed along with resistance to environmental conditions. These adhesives are popular for their ease of use, mechanical strength, and chemical resistance. Formulations can be created to make epoxies that are flexible or rigid, transparent or opaque, quick setting or slow setting. The versatility with which epoxy adhesives can be formulated helps meet almost any requirement for bonding wood, metal, glass, stone, and various plastics.

Industrial uses for epoxies range widely and include coatings, adhesives, and composite materials like carbon fiber and glass-reinforced plastic. They are the preferred choice for their ability to flow and conform to the work area, strong adhesion, chemical and heat resistance, and exceptional mechanical and electrical insulating properties.

Specifications

Adhesive Type Epoxy
Applications Hard Disk Drive Component Assembly
Brand Scotch-Weld
Color Gray
Consumer Label No
Container Volume 400 ml
Full Cure 7 Days @ 72 F (22 C)
Hardness 55 Shore D
Industries Transportation, Specialty Vehicle, Construction, Military & Government, General Industrial, Electronics, Consumer Goods
Mix Ratio Volume Base:Accelerator 1 : 01
Peel Strength at 72 Degrees F (22 Degrees C) 35 lb/in
Physical Form Flowable Liquid
Product Form Each
Shear Strength at 72 Degrees F (22 Degrees C) 4300 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture) 15
Specific Gravity 1.15
Storage Temperature 72 Degree Fahrenheit
Substrate 1 Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber
Substrate 2 Plastics (High Performance Nylon), Plastics (ABS, PVC, Acrylic), Metal, Plastics (Polyolefins and Thermoplastic Elastomers), Glass & Ceramics, Wood & Hardboard, Rubber (Except EPDM), EPDM Rubber
Time to Handling Strength 2.5 Hour
Type Epoxy Adhesive
Viscosity Range (cps) at Room Temperature 52,500
Worklife 25 minutes @ 72 F (22 C)

图片关键词

图片关键词

 

分享到:
点击次数:  更新时间:2015-02-04 09:46:53  【打印此页】  【关闭