3M™ Motor Lead Pigtail or V-Stub Splice 5382, 5-8 kV, Shielded and Non-Shielded, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1 per case

性能描述

产品类型
产品标准
产品认证
产品极数
安装方式

3M™ Motor Lead Pigtail or V-Stub Splice 5382, 5-8 kV, Shielded and Non-Shielded, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1 per case

3M™ Motor Lead Pigtail or V-Stub Splice 5382, 5-8 kV, Shielded and Non-Shielded, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1 per case

 

 
3M ID  80611425408    UPC#  00051128559529    Part Number  5382    

 

 

电机引线连接3M™ Motor Lead Pigtail Splice 5317, 5-8 kV, Non-Shielded, 2-1/0 AWG (feeder), 4-1/0 AWG (motor lead), 1 per case

3M™ 5380 Series Motor Lead Pigtail Splice Kit is designed for splicing motor lead cables to incoming feeder cables. This kit makes use of high dielectric-constant stress-control termination for feeder cables to reduce the size and electrical stress. It is rated for 5/8 kV-rated applications. The kit accommodates shielded and non-shielded cables.

 

  • Designed for use with 30000 Series copper compression lugs or other UL Listed copper lugs
  • Perfect for use with shielded and non-shielded cables
  • 0.3 to 0.51-in O.D. insulation
  • Accommodates wire size of 10 to 4 AWG
  • Rated for 5/8 kV applications
  • The lug or splice cover is made of EPDM rubber to resist punctures and abrasion damage
  • Includes 6 tubes of silicone grease, 3 cold shrink jacket tubes, 3 cable ties, 3 ground straps and 1 instruction sheet
  • Withstands a temperature range of 194 to 266 degrees F (90 to 130 degrees C)
  • RoHS 2011/65/EU Compliant
  • 1 kit/case
3M™ 5380 Series Motor Lead Pigtail Splice Kit includes 3 lug covers, 3 cold shrink terminations, 12 mastic sealing strips, 3 copper tape strips, 3 constant force springs, 3 cleaning kits and more. The lug or splice cover is used as a slip-on insulator and made of EPDM rubber to resist punctures as well as abrasion damage. The mastic provides protection against moisture on the pigtail kits. It is perfect for splicing motor lead connections for polyethylene cable, cross-linked polyethylene cable, ethylene propylene rubber cable and copper conductors. RoHS 2011/65/EU Compliant.

Specifications

 

 Brand‎ ‎ 3M
 Connection Type‎ ‎ Pigtail (Non-Shielded)
 Range Feeder Cable (AWG & kcmil)‎ ‎ 8-4
 Range Motor Lead (AWG & kcmil)‎ ‎ 10-4
 RoHS 2011/65/EU Compliant‎ ‎ Yes
 RoHS EU Comments‎ ‎ RoHS 2011/65/EU compliant without exemption 
*Important RoHS information
 Trademark‎ ‎ 3M
 Voltage‎ ‎ 5/8 kV

Catalog

 

Data Sheet

 

Flyer

 

Instructions_Manual

 

SDS

 

图片关键词

 

图片关键词

图片关键词

Each kit makes three splices. Lugs not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).

 

图片关键词 Motor Lead Pigtail Splice 5316-5319 - Instructions/Manual (PDF 577.7 K)(点击下载)

 

 
Medium Voltage Leads, 5–8 kV
3M™ Motor Lead Pigtail Splice Kits, Non-Shielded Pigtail, 5316-5319
3M™ Motor Lead Pigtail Splicing Kits 5300 Series are a series of kits designed for splicing motor lead cables to incoming feeder cables, including pigtail
(stub) connections at 1000 volts or less, as well as 5/8 kV non-shielded feeders. The splice’s main component, the slip-on splice cover, is made from EPDM
rubber. A mastic strip is used for the moisture seal.
These kits are designed to be used with copper compression, one- or two-hole lugs. After being crimped onto the cables, the lugs are bolted together in a
pigtail configuration, then insulated and sealed with the 3M Motor Lead Splicing Kit. Each kit contains the necessary materials (except lugs) needed to make
three splices. The lugs must be purchased separately. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be
used.

图片关键词

 

图片关键词

图片关键词

图片关键词

图片关键词

图片关键词

图片关键词

图片关键词

图片关键词

 

 

分享到:
点击次数:  更新时间:2016-08-09 10:47:51  【打印此页】  【关闭