3M™ EMI Absorber AB7030HF

性能描述

产品类型
产品标准
产品认证
产品极数
安装方式

3M™ EMI Absorber AB7030HF

3M™ EMI Absorber AB7030HF

Part Number AB7030HF3M ID EMMDM2AB7030HF

 

  • Flexible, high permeability magnetic sheets
  • One-sided acrylic pressure-sensitive adhesive
  • Low Halogen version of AB7000 series absorbers.
  • Less than 900 ppm bromine and chlorine
Specifications
  • Application Category
    EMI/EMC Applications
  • Applications
    Cross Talk Reduction, EMI Absorbing, EMI Noise Suppression
  • Carrier Binder Polymer and Filler
    Flexible polymer resin with magnetic fillers
  • Good Absorbing Frequency Range
    200 MHz - 10 GHz
  • Product Series
    AB7030HF
  • Product Use
    Aerospace, Medical Devices, Automotive, Consumer Electronic Devices
  • Total Tape Thickness without Liner
    14 mil
  • Total Tape Thickness without Liner (metric)
    0.35 mm
Details
  • Flexible, high permeability magnetic sheets
  • One-sided acrylic pressure-sensitive adhesive
  • Low Halogen version of AB7000 series absorbers.
  • Less than 900 ppm bromine and chlorine
  • Less that 1500 ppm total bromine and chlorine
  • Meets guidelines set forth in IEC 61249-2-21.
  • Easily die cut into complex shapes
  • Consists of a flexible polymer resin loaded with soft metal flakes
  • Acrylic pressure-sensitive adhesive allows for easy application
  • Improved lower frequency absorber vs. the AB5000 or AB5000S series (@ < 1 GHz)
  • Reduce EMI and RF noise in electronic systems
  • Apply to noisy traces, IC's and reflective surfaces in an enclosure

3M™ EMI Absorber AB7030HF. This low-halogen, flexible, high-permeability magnetic sheet is a broadband absorber for near-field applications in the 50 MHz-10 GHz range. Easily die cut. Backing thickness of 0.35 mm.

Additional Information
AB7000HF absorber series is typically used for applications requiring EMI control and signal integrity improvement in the 50 MHz to 10 GHz range. It is a broadband EMI absorber designed to work in near-field applications inside and around electronic devices and assemblies. Common applications include reduction of noise and crosstalk inside mobile electronics, reduction of crosstalk and EMI on ribbon cables and flex cables, reduction of radiated IC noise (applying absorber directly to the noisy IC), damping of radiation and oscillations inside shields and cavities, and increasing signal integrity on high speed data lines through crosstalk reduction.

3M ™ EMI Absorber AB7000HF Series (Halogen Free)
Typical Properties
Note: The following technical information, test methods and data should be considered representative
or typical only and should not be used for specification purposes. The Technical Data Sheet (TDS)
information is based on a limited set of test results and do not reflect the COA specification limits.
Final product specifications and associated manufacturing facility testing methods used for the
commercialized product are outlined in the products Certificate of Analysis (COA) that is provided
upon request or with the products shipment.
图片关键词
The following technical information and data should be considered representative or typical only and
should not be used for specification purposes.
图片关键词

Brochure 

 

分享到:
点击次数:  更新时间:2016-08-31 16:37:04  【打印此页】  【关闭