3M Epoxy Primer GP 120 (防腐GP 120)

Scotchkote Epoxy Primer GP 120 has been specifically developed as an anti corrosive coating for steel structures that cannot be abrasive blast cleaned.

· Combines good application characteristics with excellent corrosion protection.

· Designed for application by brush, roller or spray.

· Suitable for use on mechanically prepared steelwork or high pressure water cleaned steel, can also be used on abrasive blasted steel.

· Can be applied over existing coatings.

· Can be used as a two coat primer/finish system or

1. Remove oil, grease and loosely adhering deposits and all visible water.

2. Appropriately prepare the surface

3. Apply Scotchkote Epoxy Primer GP 120 coating at the specified thickness

4. Allow to cure.

5. Visually inspect the coating for defects.

6. Repair all defects.