3M Scotchcast 92-NBB电缆防水中间接头

Application3M™ Scotchcast™ resin Y-Branch kits 92-NBB x are designed to be used for 1-core up to 5- core non shielded, polymeric, low voltage energy cables. The application incorporates electrical ins





3M™ Scotchcast™ resin Y-Branch kits 92-NBB x are designed to be used for 1-core up to 5- core non shielded, polymeric, low voltage energy cables. The application incorporates electrical insulation and mechanical protection of joints with compression or mechanical connectors. They can be used for indoor and outdoor, underground and submerged applications.


         • Resin 40 in transparent two chamber bags with integrated Closed Mixing and Pouring (CMP) system.

         • Two part (upper and lower) mould shelves with Snap Fit closing system for quick and easy handling.

         • Transparent Mould Body for easy control of connector distances in the joint.

         • Pre cut foam sealing elements to provide reliable sealing to the Mould Body without tooling for all cable application diameters.

         • Closure cap to prevent any pollution.

Kit content

         • Two part (upper and lower) transparent mould shelves with closure cap

         • Scotchcast™ 40 resin bag with CMP

         • Pre-cut sealing elements

         • Abrasive sponge

         • Detailed instruction

Product Description

3M™ Scotchcast™ resin Y-Branch joint kit will be delivered with two part (upper and lower) transparent mould shelves for simple and easy handling. Distances inside the body can be checked easily.

All necessary dimensions, like application range, cable preparation are given in the detailed instruction.

The three foam sealing elements can be adapted to the required cable diameter by removing the pre-cut adapter rings.

The resin 40 is delivered in two chamber bag with integrated spout and aluminium Guard Bag for protection against humidity.

The reopenable seam and integrated spout with a membrane does provide a Closed, Mixing and Pouring system.

After the seam of the two chamber bag was opened, the resin components can be mixed. To pour the resin into the mould body, the spout shall be connected with the dome by turning for 180°. While turning, the membrane is cut open to pour the resin.

The Closed Mixing and Pouring System does provide resin handling without any skin contact.

For protection against pollution, a closure cap is applied onto the dome.

After curing, the remaining resin in the bag can be disposed as house waste.

Product Selection



The full Scotchcast™ Resin Kit Series 92-NBB 0 up to 92-NBB 2 were tested according EN50393 Table 3 / I / B1

Usage Information:

The resin will be supplied, in two-chamber plastic pouches with peelable barrier in the correct stoichiometric proportion. This type of packaging will assure the correct mixing ratio for applying the resin. The packaging includes a Closed Mix and Pour Delivery System. The integrated pouring spout will be opened while attaching the mixed resin bag to the housing of the joint or by using the supplied opener. For other information, relevant for the usage of the resin, like Gel-Time, Pot-Life, viscosity, density etc. please see the relevant Data Sheet.


3M™ Scotchcast™ Resin 40 has a shelf life of at least 36 months when stored between 15°C and 35 °C with a humidity level < 75 % in the originally sealed bag. The expiration date of each product appears on the product label. Storage beyond the date specified on the label does not necessarily mean that the product is no longer usable. In this case however, it is the responsibility of the user to determine applicability of the resin.

Safety and Handling:

3M provides its customers with a product specific Material Safety Data Sheet (MSDS) to cover potential health effects, safe handling, storage, use and disposal information. 3M strongly encourages its customers to review the MSDS on its products prior to their use.

Product Stewardship:

3M has a fundamental concern for all who make, distribute and use its products, and for the environment in which we live. This concern is the basis of our philosophy and policies by which we assess the health and environmental information on our products and then take the appropriate steps to protect employee, the public health and the environment.

Customer Notice:

3M encourages its customers and potential users of 3M products to review their applications for such products from the standpoint of human health and environmental quality. To help ensure that 3M products are not used in ways for which they were not intended or tested. 3M personnel are available to assist customers in dealing with ecological and product safety considerations. Your 3M sales representative can arrange for the proper contacts.

Regulatory Status:

The 40 Resin is in compliance with all European directives and regulations, relevant for this product.

The 40 Resin is in compliance to EU directive 2002/95/EC (RoHS) and EU regulation 1907/2007/EC (REACH)


3M and Scotchcast are trademarks of 3M Company